Siemens SWT-3000 Equipment Manual page 148

SWT 3000 Equipment Manual
Click on Select All and then on Add Selection. The sections of the application are displayed (ac-
cording to the sectors they belong to) in the list box on the right-hand side.
Figure 49:
Figure 50:
© SIEMENS AG 2008
vMUX
Display of the sections in the list box after the Add Select has been executed
Wrong file selection will result in unsuccessful flash programming. Verify
that the file selected matches to the target and device physically con-
nected.
Starting of the programming process
Edition p3_3_2x 08/09
Chapter 3: Service program PowerSys
Please click on the Program button to
start the programming cycle. The Execute
MemTool Command dialog will be opened
to show the programming progress. The
upgrade starts with erase of the flash,
programming and finally verification.
Page - 35