Siemens SWT-3000 Equipment Manual page 264

SNMP and Remote Access
The figure below shows the remote connection to the SWT 3000 in station A via RAS or terminal
server. The access to the SWT 3000 devices in station B and C is possible when the RM in-band
channel is activated. For the SSB - SSB connection in station B a crossed cable has to be used.
One SSB interface must be configured as "Slave" the other one as "Master".
Station A
SWT3000
SC SSR SSB
*)
RS232
*) RAS
orTerminal server
Office
PowerSys
Figure 19:
The PowerSys program is connected with <Data source/Remote device> or using the correspond-
ing button. Subsequently the RM address of the SWT 3000 has to be entered.
Figure 20:
Page - 24
SWT3000
SC
TCP/IP
Intranet (LAN)
Remote access
Connection to the SWT 3000 in station B and C with the RM function
Data source
device button
Connection of the service PC via RM channel
Edition p3_3_2x 08/09
Station B
SWT3000
SSR SSB SC SSR SSB
Master – Slave con-
nection with crossed
cable
RM In-band remote monitoring channel
SSB Remote Monitoring interface
SC
SSR Remote access interface SWT3000
RAS Remote access server
remote
SWT 3000 Equipment Manual
Station C
RM SWT3000
SC
Remote monitoring
Overhead line
Service channel interface
© SIEMENS AG 2008
SSR SSB