Chapter 3: Service program PowerSys
The PowerSys menu
Figure 8:
Table 1:
Selection
Save
Save As
Program device
Send Config. to Device
Print
Print Preview
Print Setup
FW Package
Exit
Print Preview
With selecting <Print Preview> the program prepares a print preview which is displaying either the
equipment settings of the PowerSys program or, if opened, the event memory from an integrated
SWT 3000 in a window as shown below.
Figure 9:
Page - 8
The PowerSys menu
Functions of the PowerSys menu
Display of the print preview
Edition p3_3_2x 08/09
Function
Saving the device configuration in an existing file.
Saving the device configuration in a new file
Saving the adjustments in the device
Saving an „Off line" configuration in the device
Print out of the complete device data
Print preview. Possibility to store the preview in a file
Modification of the printer setup
Import from firmware package for program updates
Abort PowerSys program
Saving the print preview in
the PDF or RTF format.
Print out
SWT 3000 Equipment Manual
© SIEMENS AG 2008