Flow Control - Allied Telesis 29M2/SP-BA Installation And User Manual

Flow Control

The Flow Control feature allows you to control the flow between the port of
the 29M2/SP-BA fiber network adapter and its link partner. You can enable
or disable the adapter port to process received PAUSE frames and
transmit PAUSE frames.
To enable or disable the Flow Control feature, do the following:
1. Access the Advanced Properties.
See "Accessing Advanced Properties" on page 49.
2. Select Flow Control in the Property box.
The Flow Control page is displayed as shown in Figure 23.
3. Select one of the following options if available:
Note
The options and default setting depend on your operating system
and the version of the driver that you installed.
Auto Negotiation — The setting of the Flow Control property is

determined during the auto-negotiation process.
Disabled — The adapter ignores PAUSE frames.

Figure 23. Flow Control Page
Chapter 4: Modifying Advanced Properties
53