Installing A Network Adapter - Allied Telesis 29M2/SP-BA Installation And User Manual

29M2/SP-BA Fiber Network Adapter Installation and User's Guide

Installing a Network Adapter

26
The following instructions apply to installing the 29M2/SP-BA fiber network
adapter onto your system.
To install the network adapter, perform the following procedure:
Note
You need a Phillips-head screwdriver.
1. Review the "Pre-Installation Checklist" on page 25 and "Reviewing
Safety Precautions" on page 21.
Before installing the network adapter, ensure the system power is OFF
and unplugged from the power outlet, and that proper electrical
grounding procedures have been followed.
Warning
The module is being installed in a system that operates with
voltages that can be lethal. Before you remove the cover of your
system, you must observe the following precautions to protect
yourself and to prevent damage to the system components.
– Remove any metallic objects or jewelry from your hands and
wrists.
– Make sure to use only insulated or nonconducting tools.
– Verify that the system is powered OFF and unplugged before
accessing internal components.
– Installation or removal of modules must be performed in a static-
free environment. The use of a properly grounded wrist strap or
other personal antistatic devices and an antistatic mat is strongly
recommended. E39
