29M2/SP-BA Fiber Network Adapter Installation and User's Guide
Ethernet@WireSpeed
52
The Ethernet@WireSpeed feature connects two devices even when the
devices are connected through an impaired copper cable.
Note
This feature is valid only for copper ports and not applicable for the
29M2/SP-BA fiber network adapter. The setting is always disabled.
To view the Ethernet@WireSpeed setting, do the following:
1. Access the Advanced Properties.
See "Accessing Advanced Properties" on page 49.
2. Select Ethernet@WireSpeed in the Property box.
The Ethernet@WireSpeed page is displayed as shown in Figure 22.
Figure 22. Ethernet@WireSpeed Page
3. Click OK.