Updating The Driver Software - Allied Telesis 29M2/SP-BA Installation And User Manual

Chapter 3: Installing the Driver Software

Updating the Driver Software

If your operating system automatically installs a default driver, you need to
update the driver software with the driver that you downloaded from the
Allied Telesis website. To obtain the latest version of the 29M2/SP-BA
driver, see "Downloading the Driver Software" on page 37.
To update the driver software, you use the same procedure for installing
the driver software for the first time. The only difference between updating
and installing the driver software is the name of your adapter that Device
Manager detects and lists.
Device Manager lists your network adapter entry as "Allied Telesis
AT-29M2 Network Adapter" once you installed the driver software. Before
you installed the driver software, Device Manager may list your network
adapter entry as a Broadcom device or Allied Telesis device.
To update the driver software for your 29M2/SP-BA network adapter, see
"Installing the Driver Software" on page 40.
43