29M2/SP-BA Fiber Network Adapter Installation and User's Guide
32
15. If you put the hard drive bay back in place, verify the ribbon cable is
clear of the 2.5" hard drive bay.
Note
You may need to bend the cable near the SFP board to prevent the
hard drive bay from interfering.
16. Put the system's cover back in place and secure it with the screw
removed in step 3.
17. Power the system on.
When the system returns to proper operation, the network adapter is
fully installed. Next, connect the network cables. See "Connecting a
Network Cable" on page 33.