Large Send Offload V2 (Ipv6) - Allied Telesis 29M2/SP-BA Installation And User Manual

Large Send Offload v2 (IPv6)

The Large Send Offload v2 (IPv6) feature allows you to control the load of
sending out large packets. When this feature is enabled, the adapter port
segments large packets for IPv6 traffic and reduces the CPU load.
To enable or disable the Large Send Offload v2 (IPv6) feature, do the
following:
1. Access the Advanced Properties.
See "Accessing Advanced Properties" on page 49.
2. Select Large Send Offload v2 (IPv6) in the Property box.
The Large Send Offload v2 (IPv6) page is displayed as shown in
Figure 27.
Figure 27. Large Send Offload (IPv6) Page
3. Select one of the following options:
Disable — The adapter does not segment packets for IPv6 traffic.

Enable — The adapter port segments large packets up to 256kb

for IPv6 traffic before sending them out. This is the default setting.
4. Click OK.
Chapter 4: Modifying Advanced Properties
59