Jumbo Mtu - Allied Telesis 29M2/SP-BA Installation And User Manual

Fiber network adapter with an sfp port for dell optiplex 50x0; dell optiplex 70x0

Table of Contents

29M2/SP-BA Fiber Network Adapter Installation and User's Guide

Jumbo Mtu

The Jumbo Mtu (Maximum transmission unit) feature allows you to specify

the size of the Ethernet frame that the adapter port supports. The network

performance usually improves when the larger frame size is specified;

however, the network must be capable of supporting the oversized

Ethernet frames.

To change the Jumbo Mtu setting, do the following:

1. Access the Advanced Properties.

See "Accessing Advanced Properties" on page 49.

2. Select Jumbo Mtu in the Property box.

The Jumbo Mtu page is displayed as shown in Figure 25.

3. Specify the size of the frame in the Value box.

The range of the value is from 1,500 to 9,000. The default value is

1,500.

4. Click OK.

Figure 25. Jumbo Mtu Page

Table of Contents