Table of Contents
Advertisement
Flow Control
The Flow Control feature allows you to control the flow between the
AT-2914 adapter port and its link partner. You can enable or disable the
adapter port to process received PAUSE frames and transmit PAUSE
frames.
To enable or disable the Flow Control feature, do the following:
1. Access the Advanced Properties.
See "Accessing Advanced Properties" on page 71.
2. Select Flow Control in the Property box.
The Flow Control page is displayed as shown in Figure 34.
3. Select one of the following options if available:
Note
The options and default setting depend on your operating system
and the version of the driver that you installed.
Auto Negotiation — The setting of the Flow Control property is
determined during the auto-negotiation process.
Disabled — The adapter ignores PAUSE frames.
Figure 34. Flow Control Page
Chapter 6: Modifying Advanced Properties
75
Advertisement
Table of Contents
