Installing The Driver Software - Allied Telesis 29M2/SP-BA Installation And User Manual

29M2/SP-BA Fiber Network Adapter Installation and User's Guide

Installing the Driver Software

40
Once you physically install the 29M2/SP-BA network card, the system
detects the new hardware and creates an entry in Device Manager when
the Windows operating system first boots up. Shortly after you log in, you
need to install the driver software for your adapter card.
Note
To install the driver software, you must have administrative
privileges.
To install the driver software, do the following:
1. Access Device Manager. see "Accessing Device Manager" on
page 39.
2. In the Device Manager window, double-click Network Adapters to
expand the field.
3. Right-click Allied Telesis Device.
The pop-up menu appears. See Figure 16 as an example.
Figure 16. Selecting the 29M2/SP-BA Adapter in Device Manager
4. Select Update Driver.