2914 Series Fiber Network Adapters with WoL Installation and User's Guide
Ethernet@WireSpeed
74
The Ethernet@WireSpeed feature connects two devices even when the
devices are connected through an impaired copper cable.
Note
The setting is always disabled on the 2914 series adapter.
To view the Ethernet@WireSpeed setting, do the following:
1. Access the Advanced Properties.
See "Accessing Advanced Properties" on page 71.
2. Select Ethernet@WireSpeed in the Property box.
The Ethernet@WireSpeed page is displayed as shown in Figure 33.
Figure 33. Ethernet@WireSpeed Page
3. Click OK.