Step 1 - Getting Started - Smith & Noble Solar & Roller Shades Step By Step Installation Instructions

STEP 1 - GETTING STARTED

Parts & Tools - Loop Control and Motorization
First, make sure you have all the parts and tools required to install your shades.
ALL THE HARDWARE YOU'LL NEED:
Pencil, screw-driver, ¼" nut driver, level, and a drill with
a ⁄ " drill bit.
1
1 6
Then find wooden studs where you'll want to attach
the brackets; if you need to mount your shades to wallboard or plaster, use a secure fastener
designed for hollow wall applications. For metal surfaces, pre-drill holes and use the included
screws. For concrete, stone, brick, or tile surfaces, use a masonry drill and appropriate plugs,
anchors, or screws.
It's important when selecting a fastener to make sure it's designed to support the weight of the
shade . Follow the fastener manufacturer's instruction from there on out .
Tools you will need:
PENCIL
(NOT INCLUDED)
POWER DRILL
(NOT INCLUDED)
smithandnoble.com
3
MOLLY SELF DRILLING TOGGLE
BOLT ANCHOR BOLT
SCREWDRIVER
(NOT INCLUDED)
LEVEL
(NOT INCLUDED)
OVERVIEW - LOOP CONTROL - NO HEADRAIL
Bracket
Bracket
Parts
SCREWS MOUNTING BRACKETS
HOLD DOWN BRACKET SPACER BLOCK
(OPTIONAL) (OPTIONAL)
Loop Control – No Headrail
Bracket
Clutch
Tensioner
Bottom Bar
INTERMEDIATE
MOUNTING BRACKET
BRACKET COVERS
NO HEADRAIL - OUTSIDE MOUNT
(OPTIONAL FOR INSIDE MOUNT)
800.248.8888
Cord
4