Smith & Noble Solar & Roller Shades Step By Step Installation Instructions page 15

PAIRING THE REMOTE
For added protection, your remote
control arrived with a protective film on
top. Please remove this film prior to use.
Your shades will need to be paired to the
remote prior to operating your shade. See
Pair the Remote below.
Pair The Remote
This remote control has 14 channels.
Before pairing the remote, determine
which shade(s) you want on which
channel. All shades paired to a remote
will also automatically be programmed to
the "ALL" channel.
If a battery is not already installed in the
remote, follow the instructions REPLACE
BATTERY IN REMOTE.
27 smithandnoble.com
PROTECTIVE
FILM
CHANNEL
DISPLAY
UP
STOP/
FAVORITES
DOWN
CHANNEL
RAIL
SELECTOR
REMOTE FRONT
LIMIT
BUTTON
CONFIRM
BUTTON
REMOTE BACK
SHADE MOTOR
ON/OFF
SWITCH
CHARGING SETTING
PORT BUTTON
PAIRING THE REMOTE
Pair The Remote
1. Select the channel that you want to
pair the shades to, using the CHANNEL
selector button. The button will scroll
through channels in ascending order
only. The remote will go back to
channel 1 after channel 14.
2. Press the SETTING button on the
motor until the shade jogs & beeps.
3. Press and hold the CONFIRM button
until the shade(s) jogs & beeps once.
The shade is now paired to the remote.
3. Repeat steps 1-3 to pair remaining
shades to the rest of the channels.
800.248.8888
28