STEP 1 - PARTS & TOOLS OVERVIEW Getting Started Dual Shade with Loop Control – No Headrail First, make sure you have all the parts and tools required to install your shades. MOUNTING CLUTCH MOUNTING ALL THE HARDWARE YOU’LL NEED: BRACKET BRACKET Pencil, screw-driver, ¼”...
STEP 2 - MOUNTING BRACKETS STEP 3 - HANGING THE SHADE & BRACKET COVERS Inside Mount Hanging Shades The installation brackets are always Once the brackets are secured and level, mounted so that the short legs face in. the fabric roll can be inserted. Make sure Brackets must be in line and level.
STEP 4 - INSTALLING CORD TENSIONER STEP 5 - OPERATING THE SHADE Installing Cord Tensioner Loop Control Your window shade has arrived with a Opening and closing your new Smith & cord tensioner to comply with current Noble shades is entirely hassle-free. On child safety standards.
OVERVIEW STEP 1 - MOUNTING BRACKETS Dual Shade with Motorizati on – No Headrail Inside Mount The installati on brackets are always MOUNTING MOTOR MOUNTING mounted so that the short legs face in. BRACKET BRACKET Brackets must be in line and level. Shim brackets on inside mounts if necessary.
STEP 3 - HANGING THE SHADE & BRACKET COVERS SKEW ADJUSTMENT Hanging Shades Skew Adjustment Fabric Roll If the shade does not raise evenly, first Once the brackets are secured and level, make sure the mounting brackets are the fabric roll can be inserted. Make sure mounted level with each other.
Page 8
Smith & Noble Smart Shades Operati ng & Programming Guide For Rechargeable Motorized Shades Roller & Solar Shades Sheer Shadings 13 smithandnoble.com...
PAIRING THE REMOTE PAIRING THE REMOTE Pair The Remote For added protecti on, your remote control arrived with a protecti ve fi lm on 1. Select the channel that you want to top. Please remove this fi lm prior to use. pair the shades to, using the CHANNEL Your shades will need to be paired to the selector butt on.
OPERATING THE REMOTE SETTING SHADE LIMITS Adjust Shade Limits (If Desired) Select the desired channel with the CHANNEL butt on. The lower and upper limits have been set at CHANNEL CHANNEL the factory. If you need to make adjustments Raise and Lower Shade DISPLAY DISPLAY to the limits, follow the instructi ons below.
Page 11
SETTING SHADE LIMITS SETTING & USING A FAVORITE POSITION If there is only a single shade on the channel Hold the LIMIT butt on unti l the shade jogs proceed to SETTING A FAVORITE POSITION below. & beeps . CHANNEL CHANNEL If there is more than one shade on the channel, all Lower Limit...
UNPAIR THE REMOTE ADD OR REMOVE REMOTE OR CHANNEL To unpair a shade(s) from a selected channel, Replace Original Remote, Add Additi onal press and release the CONFIRM butt on on Remote or Add Shade to an Additi onal the back of the remote. CHANNEL Channel DISPLAY...
ADD OR REMOVE REMOTE OR CHANNEL CHARGING SHADE When the shade begins to operate slower To De-Acti vate the Jog Functi on SHADE MOTOR than normal it is ti me to charge the batt ery. 1 . The remote comes pre-set with jogging Plug the 8.4v charger into the port on the functi on acti vated.
SOLAR PANEL INSTALL SOLAR PANEL (OPTIONAL) Determine Panel Placement Tape Method SOLAR PANEL RECHARGE UNIT The solar Panel should be placed where it Cut the tape to fi t inside the white border gets the maximum amount of sunlight per as shown.
INSTALL SOLAR PANEL TROUBLESHOOTING Connect Solar Panel to Motor PROBLEM SOLUTION SHADE MOTOR After the shade is installed, plug the Shade will not raise or lower. Recharge motor. solar unit into the motor recharge port. Shade runs slowly. Recharge motor. The motor continues to run in The limit setting was unsuccessful and one direction.
CARE & CLEANING /SAFETY NOTES Care & Cleaning Use brush or dust head attachment. Occasional light vacuuming with a soft bristle attachment or gentle feather dusting is all that is required to keep your shades looking fresh and neat . Safety First.
Warranty Service The enjoyment of your window coverings should be everlasting, which is why our products come with a limited lifetime warranty. The warranty applies to the original owner, requires a proof of purchase and covers defects in material or craftsmanship.