Operating The Remote - Smith & Noble Solar & Roller Shades Step By Step Installation Instructions

OPERATING THE REMOTE

Select the desired channel with the CHANNEL
button.
Raise and Lower Shade
Press the UP or DOWN buttons to raise or
lower the shade.
Tapping the UP or DOWN buttons for less
than 2 seconds will move the shade in short
steps. Holding the UP or DOWN buttons down
for more than 2 seconds before releasing will
operate the shade at the faster standard speed.
Press the STOP button to stop the shade at the
desired position.
Open and Close the Vanes (Sheer
Shadings Only)
Select a channel using the CHANNEL button.
The button will scroll through channels in
ascending order.
Lower the shading all the way down, using the
DOWN button.
Tapping the UP or DOWN button for less than
2 seconds will move the shade in short steps.
This allows precise control of the vane open/
close position.
Holding the UP or DOWN button down for
more than 2 seconds before releasing will
operate the shade in the faster standard speed.
29 smithandnoble.com
CHANNEL
DISPLAY
UP
STOP/
FAVORITES
DOWN
CHANNEL
RAIL
SELECTOR
REMOTE FRONT
LIMIT
BUTTON
CONFIRM
BUTTON
REMOTE BACK
CHANNEL
DISPLAY
UP
STOP/
FAVORITES
DOWN
CHANNEL
RAIL
SELECTOR
REMOTE FRONT
LIMIT
BUTTON
CONFIRM
BUTTON
REMOTE BACK
SETTING SHADE LIMITS
Adjust Shade Limits (If Desired)
The lower and upper limits have been set at
the factory. If you need to make adjustments
to the limits, follow the instructions below.
Please Note: When clearing the factory set
limits, both the upper and lower limits will
need to be reset.
Use the CHANNEL buttons to select the
channel for the shade that needs to be
adjusted. Then follow the directions below.
When adjusting one shade, the other shades
on that channel need to be temporarily
unpaired from the remote (see UNPAIR
THE REMOTE) or turn the motor off using
the ON/OFF switch.
Follow the SETTING LIMITS instructions
and then re-pair shades by following the
steps to PAIR THE REMOTE or turn the
motor on using the ON/OFF switch.
If there is only a single shade on the channel,
proceed to SETTING LIMITS.
SHADE MOTOR
ON/OFF
SWITCH
CHARGING SETTING
BUTTON
PORT
800.248.8888
30