Step 3 - Hanging The Shade - Smith & Noble Solar & Roller Shades Step By Step Installation Instructions

STEP 2 - MOUNTING BRACKETS
Outside Mount MOTORIZATION
with Metal Valance
The end installation brackets are always
mounted so that the short legs face in .
Brackets must be in line and level . The
roller must be level for the shade to
operate properly .
Hold the left shade above the window so
that it's positioned in the desired location
over the window opening . Mark the
position of the square end brackets on the
wall. Mount the square end bracket to the
wall using both screws. The square end
bracket should be installed with the open
end down .
Hold up the shade positioning the left end
into the installed square end bracket and
mark position of intermediate bracket .
The spring pin end should compress half
way for best fit. Install the intermediate
bracket using both screws making sure it
is aligned with other installed brackets .
Hold the right shade up and mark the
position of the square end bracket. Attach
the square bracket using two screws. The
square bracket should be installed with
the open end down .
Make sure all brackets are aligned and
installed following the proper bracket
configuration (below).
smithandnoble.com
21
OUTSIDE MOUNT

STEP 3 - HANGING THE SHADE

Hanging the Shade
Once the brackets are secured and level,
the fabric roll can be inserted . Make sure
your hands are clean to avoid soiling the
fabric .
Be sure the clutch and roller end plug are
inserted into the roller . Hold the shade
with the bottom of the clutch facing the
floor, and the beaded cord hanging
straight down . Be sure the shade is fully
rolled on the tube .
Insert the spring loaded pin end into the
round hole of the bracket .
Push the clutch end toward the pin end
to compress the spring . The pin should
compress half way in for best fit. Line up
the hooks on the clutch with the two slots
in the bracket . Allow the spring to release
and let the hooks go into the slots .
Once the two hooks are through the slots,
gently pull down on the clutch until the
hooks lock securely to the bracket .
800.248.8888
22