Step 3 - Hanging The Shade; Step 4 - Attaching The Valance; Step 5 - Installing Cord Tensioner - Smith & Noble Solar & Roller Shades Step By Step Installation Instructions

STEP 3 - HANGING THE SHADE

Hanging the Shade
Once the brackets are secured and level,
the fabric roll can be inserted . Make sure
your hands are clean to avoid soiling
the fabric .
Be sure the clutch and roller end plug are
inserted into the roller . Hold the shade
with the bottom of the clutch facing
the floor, and the beaded cord hanging
straight down . Be sure the shade is fully
rolled on the tube .
Insert the spring loaded pin end into the
round hole of the bracket .
Push the clutch end toward the pin end
to compress the spring . The pin should
compress half way in for best fit. Line
up the hooks on the clutch with the two
slots in the bracket . Allow the spring to
release and let the hooks go into the
slots .
Once the two hooks are through the
slots, gently pull down on the clutch until
the hooks lock securely to the bracket .

STEP 4 - ATTACHING THE VALANCE

Attaching the Valance
Insert a valance clip into the bottom front
keyhole slot of each bracket .
Press the bottom firmly to lock into place .
Hold the valance on the top of the bracket
first, and rotate downward.
Press until the bottom hook feature on
the valance engages and is locked to the
valance clip .
Bracket Covers - Outside Mount
Press the covers onto the brackets as
shown . Covers will snap in place .
Bracket Covers - Inside Mount
Snap or peel adhesive backing and stick
cover over exposed portion of installation
bracket .
smithandnoble.com
17
"L" portion of valance
Locked
Pull

STEP 5 - INSTALLING CORD TENSIONER

Plunger
Bead
locking
groove
STEP 6 - OPERATING YOUR SHADE
Front
Rear
Bead
Bead
Chain
Chain
Installing Cord Tensioner
Your window shade arrived with
a cord tensioner to comply with
current child safety standards . The
cord tensioner MUST be mounted
and secured before the window
shade will operate correctly . Please
see installing cord tensioner on p8 .
Operating your Shade
Opening and closing your new Smith
& Noble shades is entirely hassle-
free. Using the loop control, pull the
rear bead chain to lower the shade
and, the front bead chain to raise.
800.248.8888
18