The new value can be set by sliding the finger or turning the knob; touching the "" symbol in the
window automatically confirms the value and the window goes back to "summary" screen mode; vice-
versa, if the "
" symbol is touched the new parameter value is not confirmed and the previous value
remains active. Bottom-left of the "summary" screen has the symbol "
the previous screen, while bottom-right has the symbol "
2.10 Cooking cycle with core probe and
Set the following parameters by touching the "Advanced" mode function icon on the display (Fig. 18) and
then sliding your finger twice on the display to the left (Fig. 19):
Core temperature
ΔT
Temperature
Humidity %
The parameter value is set by sliding, up or down, your finger on the "number" next to the parameter (Fig.
20) to the desired value; or by turning the knob clockwise or anti-clockwise to the desired value. This value
is confirmed by pressing the knob; turning it again goes directly to the next parameter.
19
ΔT
temperature "Advanced" mode
Fan speed
"Semi-static" cooking
Fig.18
Fig. 20
" which allows to go back to
" which allows stopping the cooking cycle.
Fig. 19
Fig. 21