Troubleshooting - eka MILLENNIAL MKF 464 TS Original Operating And Instruction Manual

4 Troubleshooting

Type of fault
Control panel totally off
(the oven does not work)
Cooking cycle activated:
the oven does not work
Steam cycle activated:
there is no steam
production in the cooking
chamber
Closed door: steam
escapes through the
gasket
The oven does not cook
evenly
Cause of the fault
Non conforming connection to the
power mains
Mains voltage not present
Electronic board protection fuse
(with microprocessor) blown
Door open or ajar
Magnetic sensor damaged
Non conforming water mains
connection
Closed stopcock
Obstructed water inlet filter
Damaged water inlet solenoid
valve
Steam generator safety
thermostat activated
Non conforming gasket assembly
Damaged gasket
Loosened handle "nose"
One of the motors is locked or
turns at low speed
The motors do not reverse
direction
Corrective action
Check connection to the mains
Restore power supply voltage
Contact a skilled technician
Close the door properly
Contact a skilled technician
Check connection to the water
mains
Check the cock
Clean the filter
Contact a skilled technician
Contact a skilled technician
Check gasket assembly
Contact a skilled technician
Contact a skilled technician
Contact a skilled technician
Contact a skilled technician
36