eka MILLENNIAL MKF 464 TS Original Operating And Instruction Manual page 7

Electronic oven with touch screen
Table of Contents

Advertisement

RESIDUAL RISKS
 After baking open the door with caution, to avoid the violent outflow of heat which might cause burns.
 During oven operation pay attention to hot areas of its outer surfaces (marked on the appliance).
 Do not use the door handle to move the appliance (possible glass breakage).
 The supporting bench must be able to withstand the weight of the machine and house it correctly.
 The appliance is fitted with electrical parts and must never be washed with a water or steam jet.
 The appliance is electrically connected: disconnect the power supply before performing any type of
cleaning.
 To avoid incorrect connections of the appliance, the relevant electrical/water connections are
marked on the appliance by suitable identification plates.
Only for wheeled models (MKF 1664 TS – MKF 2011 TS)
 Appropriate heat protection clothing must be worn when acting on the release device to actuate sliding
(upwards) of the internal door glass (position to insert the tray trolley), burn hazard!
 Appropriate heat protection clothing must be worn when acting on the internal door glass after a
cooking cycle to slide it downwards (washing position/cooking chamber pre-heating), burn hazard!
 Appropriate heat protection clothing must be worn when extracting the tray trolley from the oven after
a cooking cycle, burn hazard!
 Ensure the tray trolley can be handled with ease, with no hindrance to insertion and extraction
operations: any collision may cause the spillage of hot liquids or food, burn hazard!
 Close trays containing liquids so these cannot be spilled when they are hot, burn hazard!
 When the tray trolley is inserted in the oven, before closing the door ensure the release device for sliding
the internal glass (door) has been activated and the glass is fully up: any impact of the trolley against the
glass might break it, injury hazard!
 The trolley is fitted with a suitable rod for locking trays. The rod must always be inserted when the
trolley is handled during use: trays might fall, injury hazard!
 If the tray trolley is not moved, the wheel parking brake must be engaged: the trolley might move on
uneven floors, injury hazard!
 While loading and unloading the tray trolley, engage the wheel parking brake: the trolley might move,
injury hazard!
 The tray trolley is mounted on wheels, therefore it might tip over if it is moved on uneven floors, injury
hazard!
 When inserting or extracting the tray trolley into or from the oven, pay the utmost attention not to
accidentally damage the internal glass gasket of the door: it is recommended to open the oven door
completely while moving the trolley.
6

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents