Additional Functions - eka MILLENNIAL MKF 464 TS Original Operating And Instruction Manual

2.6 Additional functions:

PRE-HEATING
MAINTENANCE
POSTPONE
The "PRE-HEATING" function can be enabled or disabled by the user;
when enabled, there is an automatic increase of 40°C of the set
cooking temperature.
If, for example, a temperature of 180°C is set ("Fase 1" (Step 1)), the
"PRE-HEATING" function will allow reaching the temperature of
220°C inside the cooking chamber. A buzzer warns that this
temperature has been reached and the display shows the following
message: "PRE-HEATING OK OPEN THE DOOR". The temperature is
maintained until the door is opened.
Open the door, put the food in the oven, close the door: the cooking
cycle starts automatically.
The "PRE-HEATING" function cannot be used together with the
delayed start.
The pre-heating temperature cannot exceed 270°C.
The "MAINTENANCE" function can be enabled or disabled by the
user; when enabled in the cooking program, it becomes operational in
the last step of the program and it consists in maintaining the
temperature inside the cooking chamber at 80°C. This function is used
to keep food warm at the end of cooking, for as long as necessary. It
stops when the door is opened.
The "POSTPONE" function can be enabled by the user in the cooking
program; when enabled, it allows a "delayed" start of the cooking
cycle: useful for products that must be allowed to rise before being
cooked.
The "delayed" start can be preset for a time between 1 minute and
11h and 59'. During this time only the cooking chamber lighting is
active.
This function cannot be enabled together with "pre-heating".
14