Humidity Setting; Fan Speed Setting; Delayed Start Setting; Starting/Stopping The Cooking Cycle - eka EKF 523 NT Operating And Instruction Manual

3.7 HUMIDITY SETTING

From the "COOKING PARAMETERS" screen, by touching the value of the symbol , it is possible to set the
desired value using the symbols

3.8 FAN SPEED SETTING

From the "COOKING PARAMETERS" screen (Fig.2) by touching the symbols
the fan speed. The selected symbol is highlighted.

3.8 DELAYED START SETTING

From the "COOKING PARAMETERS" screen (Fig.16), when "phase 1" is selected, touching the symbol
displays the "ADDITIONAL FUNCTIONS" screen (Fig.17). By touching the value of the symbol
possible to set the desired value using the keyboard that appears (Fig.18). Touch the symbol
confirm.
The DELAYED START can be set for a maximum time of 23 hours and 59 minutes.
To deactivate the DELAYED START function, the value 00:00 must be set.
During the delayed start phase, the "DELAYED START IN PROGRESS" screen appears (Fig.19) which
displays the "count-down"
Fig.16

3.9 STARTING/STOPPING THE COOKING CYCLE

After setting the parameters and their desired values for cooking, to start the cycle, simply touch the
symbol .
To interrupt the cooking cycle at any time, touch any area of the screen to return to the parameters screen
and keep the symbol pressed for 3 seconds
When a cooking cycle ends (in "manual" mode or in "programmed" mode) an acoustic warning ("beep")
is activated for 1 minute.
A
and . Touch the symbol
of the time before the start of the cooking cycle
Fig.17
.
Fig.15
to confirm.
Fig.18
it is possible to select
it is
to
.
Fig.19
14