Possible Alarms - eka MILLENNIAL MKF 464 TS Original Operating And Instruction Manual

5 Possible alarms

Identify the causes that inhibit the oven operation
Type of alarm
E01
Temperature
probe not detected
Impossible to start cooking
E02
Core probe not detected
Impossible to start cooking
E03
Overheated motors
safety circuit breaker
tripped"
E04
Maximum oven operating
temperature exceeded
tripped safety thermostat
E10
Poorly positioned glass move
the glass upwards
E11
Poorly positioned glass move
the glass downwards
Door open
close the door to continue
cooking
37
Cause of the alarm
Cooking chamber probe-
electronic board/
microprocessor
connection down
Damaged cooking chamber
probe
Core probe-electronic
board/microprocessor
connection
interrupted.
Damaged needle shaped
core probe.
Overheated motor (motor
thermal protection is triggered).
Active safety thermostat
Wrong position of the door
glass
Wrong position of the door
glass
Door opening during the
cooking cycle
Effect Corrective action
Impossible to Contact a skilled
start cooking technician
It is not possible
to activate a
cooking
cycle which Contact a skilled
requires to set technician
the "core
temperature"
parameter
Disabled oven Contact a skilled
operation technician
Disabled oven Contact a skilled
operation technician
Disabled oven Position the glass
operation up
Disabled oven Position the glass
operation down
Stopping the Close the oven's
cooking cycle door