Manual Mode - eka KF 1010 UD Use And Instruction Manual

_ TECNOEKA Srl __________________________________________________________ use and instruction manual _
3.3 3.3 F F F F irst ignition 3.3 3.3 irst ignition irst ignition irst ignition
When the oven is electrically powered for the first time, "ER2" appears on the control panel display
accompanied by a brief acoustic "
This way the oven warns the user that the "heart" probe ("needle" probe) is not connected to the
relevant socket (for specifically designed ovens), thus the temperature value cannot be regulated.
The message disappears when the "ON/OFF" button is pressed ON and the selected parameter value
("zero") appears (Led on next to the relevant symbol).
If the selector is turned to "0", "OFF" appears on the display. If electrical power is constant, the oven
is turned on and off normally with the "ON/OFF" button.
3.4 O O O O peration mode 3.4 3.4 3.4 peration mode peration mode peration mode
The cooking cycle can be run in "manual" or "programmed" mode.
Each cycle is made up of several cooking parameters: time/temperature/humidity/"heart"
temperature (for specifically designed ovens)/half motor speed/half power.

MANUAL MODE

To select cooking parameters, turn the selector to the selected parameter (see symbol). To set or
change the selected parameter value, rotate the regulator knob clockwise (to increase) or counter-
clockwise (to decrease).
The "time" parameter (symbol
minutes. If "INF" appears on the display this mean the timer is not set and the oven will operate
continuously until manually turned off by pressing the "ON/OFF" button.
The "temperature" parameter (symbol
The "humidity/steam" parameter (symbol
The "temperature at heart" parameter (symbol
designed ovens).
I I I I " " " "
N ORDER FOR THE N ORDER FOR THE N ORDER FOR THE N ORDER FOR THE TEMPERATURE AT HEART TEMPERATURE AT HEART TEMPERATURE AT HEART TEMPERATURE AT HEART
, , , ,
CYCLE STAR CYCLE STARTS TS TS TS CYCLE STAR CYCLE STAR AND THEN AND THEN AND THEN AND THEN
The "half motor speed/half power" parameter (symbol
the display) or off ("off" appears on the display).
A A A A
T LEAST COOKING TIME T LEAST COOKING TIME AND TEMPERAT T LEAST COOKING TIME T LEAST COOKING TIME
3.5 3.5 C C C C ooking cycle ooking cycle ON/OFF ON/OFF
3.5 3.5 ooking cycle ooking cycle ON/OFF ON/OFF
When the door is closed, the cooking cycle automatically starts 5 seconds after setting the two
parameters required for cooking (time/temperature).
The lights in the cooking chamber, the resistance and motors turn on.
When the set cooking cycle time has elapsed, the oven automatically turns off, the set parameter
values clear on the display and an acoustic signal sounds for 3 seconds. The oven readies for new
cooking cycle settings.
The cooking cycle can be stopped at any time by pressing the "ON/OFF" button "OFF".
The display turns off and an acoustic signal sounds for 3 seconds.
3.6 D D D D isplaying 3.6 isplaying / / / / changing parameters with the cooking cycle changing parameters with the cooking cycle ON
3.6 3.6 isplaying isplaying changing parameters with the cooking cycle changing parameters with the cooking cycle
When the cooking cycle is on, parameters can be displayed by turning the selector knob to the
relevant symbol.
Parameters can be changed by turning the regulator knob.
- "Time" parameter
The cooking cycle count down is displayed (blinking led on symbol
- "Temperature" parameter
The set value (fixed led on symbol
_ page 12 _________________________________________________________________________________________
BEEP
".
) can be set from 0 hours and 1 minute to 9 hours and 59
) can be set from 50° C to 270° C.
" " " "
PARAMETER TO WORK PARAMETER TO WORK PARAMETER TO WORK PARAMETER TO WORK
, , , ,
BEFORE YOU SET THE TEMPERATURE BEFORE YOU SET THE BEFORE YOU SET THE BEFORE YOU SET THE
AND TEMPERAT AND TEMPERATURE PARAMETERS MUST AND TEMPERAT URE PARAMETERS MUST BE SET FOR THE COOKI URE PARAMETERS MUST URE PARAMETERS MUST
) is displayed for 3 seconds alternated by the value
) can be set from 0 to 100%.
) can be set from 0° C to 100° C (for specifically
, , , ,
TEMPERATURE PARAMETER IN THE COO TEMPERATURE TEMPERATURE PARAMETER IN THE COOKING CHAMBER PARAMETER IN THE COO PARAMETER IN THE COO
) can be turned on ("on" appears on
BE SET FOR THE COOKING CYCLE TO START BE SET FOR THE COOKI BE SET FOR THE COOKI
ON
ON ON
IT MUST BE SET BEFORE THE COOKING IT MUST BE SET IT MUST BE SET IT MUST BE SET BEFORE THE COOKING BEFORE THE COOKING BEFORE THE COOKING
KING CHAMBER KING CHAMBER KING CHAMBER
NG CYCLE TO START NG CYCLE TO START NG CYCLE TO START
).
. . . .
. . . .