Attaching Cable Labels - Huawei FusionModule1000A20 Installation Manual

FusionModule1000A20 IT Solution
Installation Guide (2016.05, AI Version)
Step 5 Apply waterproof silicone sealant onto the joint between the waterproof metal connector and
the sheet metal on the container, and between the waterproof metal connector and cables.
Figure 10-15 Applies waterproof silicone sealant
Step 6 Spray water to test the waterproof performance of the waterproof metal connector.
----End

10.7 Attaching Cable Labels

Prerequisites


Preparations
Tool: pen
Materials: labels
Document: none
Skill requirement: common technician
Procedure
Step 1 Combined with field case preparation or production label based on a random shipping label.
Issue 02 (2017-01-10)
Cables have been connected.
You are clear about the connections of the cables to be labeled.
Clear and specific label information facilitates future maintenance, troubleshooting, alarm clearance, and
replacement.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10 Cable Installation Techniques
80