Huawei FusionModule1000A20 Installation Manual page 64

FusionModule1000A20 IT Solution
Installation Guide (2016.05, AI Version)
2.
3.
Step 3 (Optional) Install a cable distribution box.
1.
2.
Step 4 Connect battery pack power cables based on the battery pack wiring diagram.
Before connecting cables, ensure that all UPS-related circuit breakers are OFF.
1.
Issue 02 (2017-01-10)
Figure 9-14 Installing a floating nut
Push a battery pack into the rack and secure the battery pack using M6x16 screws
available in the fitting bag.
Install battery packs from the bottom up in the cabinet.
Install the conversion bracket for the cable distribution box. Secure the conversion
bracket for the cable distribution box to the position reserved for the battery pack using
screws, as shown in Figure
Install the cable distribution box. Align mounting ear holes with the thread holes on the
conversion bracket, and tighten screws, as shown in
Figure 9-15 Installing a cable distribution box
(Optional) Remove the cover from a cable distribution box.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9-15.
9 Installing Devices Inside Containers
Figure 9-15.
57