The GTA viewing/fume extraction accessory is an optional addition
to your Agilent AA instrument and can be used in conjunction with
the mirror or the Tube-CAM to give you further control over the
alignment of the graphite tube and PSD.
The GTA viewing/fume extraction accessory is compatible with Agilent 280 AA,
NOTE
240 AA and 140 AA instruments only.
The GTA viewing/fume extraction accessory has three components:
The GTA viewing/fume extraction accessory can be used with
graphite furnace operation on either a Flame or Zeeman instrument.
Agilent Graphite Tube Atomizer GTA 120 User's Guide
The GTA Viewing/Fume Extraction Accessory (Optional)
5. The GTA Viewing/Fume Extraction
Accessory (Optional)
Requirements for Fume Extraction
Installing the GTA Viewing/Fume Extraction Accessory 45
Installing the GTA Viewing/Fume Extraction Accessory to
the Instrument
Installing the Extraction System to the Laboratory Exhaust
System
Operation and Maintenance
A mirror to allow you to view the workhead sample introduction
port and simplify the alignment of the dispensing capillary.
A light to illuminate the workhead for easier viewing of the
graphite tube when aligning the PSD or when viewing using the
optional Tube-CAM.
An extraction port which can be connected to the instrument
flue, enabling efficient removal of fumes and exhaust gases from
the furnace during operation.
44
45
48
51
43