Agilent Technologies Graphite Tube Atomizer GTA 120 User Manual page 39

3
4
Figure 8. Aligning the graphite tube using the alignment tool
5
Figure 9. Using the tool ensures correct injection hole positioning (top view).
Agilent Graphite Tube Atomizer GTA 120 User's Guide
Place the alignment tool through the hole at the top of the
furnace and into the hole in the graphite tube.
Close the workhead using the accessory lever. This will hold the
graphite tube in the correct position.
Push the furnace back into position.
Using Your GTA
39