Agilent Technologies Graphite Tube Atomizer GTA 120 User Manual page 49

Adapter plate
Figure 18. The GTA viewing/fume extraction accessory fits into the flue of the
instrument exhaust system
It may be easier to disconnect the exhaust hose from the accessory first. Refer to
NOTE
'Removing the Exhaust Hose' on Page 51.
1
2
Figure 19. The baffle rest fits over the top edge of the flue
3
4
Agilent Graphite Tube Atomizer GTA 120 User's Guide
The GTA Viewing/Fume Extraction Accessory (Optional)
Remove the flue from the extraction duct.
Fit the baffle rest over the edge of the flue. Refer to Figure 19.
Re-attach the flue to the extraction duct.
If you have a 125 mm duct, unscrew the large adaptor plate from
the exhaust hose and screw on the small adaptor plate. If you
have a 150 mm duct, the adaptor plate already attached to the
accessory will be sufficient for your duct.
Flue
Baffle rest
Handle
Exhaust hose
Hose clip
Baffle rest step
49