Other; Electromagnetic Compatibility; En55011/Cispr11 - Agilent Technologies Graphite Tube Atomizer GTA 120 User Manual

Safety Practices and Hazards
Before attempting any work on the sample compartment area, you
must know exactly what matrix of solutions has been running
through the instrument and particularly what types of solvents are
involved.
Always check that the Programmable Sample Dispenser (PSD) has
been thoroughly flushed out with distilled water and that the
contents of the drain or waste container are known and properly
disposed of if necessary before touching any part.
Wash your hands and gloves thoroughly during the course of sample
compartment work. Avoid contact between hands and eyes at all
times during servicing of the instrument.

Other

GTA control units are heavy. To avoid injury, or damage to the
control unit, two people are needed to move the instrument to the
bench location.
Cooling air flow to the spectrometer and the GTA must be
unobstructed. Do not block the ventilation grills.
Do not position the equipment so that it is difficult to operate the
disconnecting device.

Electromagnetic Compatibility

EN55011/CISPR11

Group 1 ISM equipment: group 1 contains all ISM equipment in
which there is intentionally generated and/or used conductively
coupled radio- frequency energy which is necessary for the internal
functioning of the equipment itself.
Class A equipment is equipment suitable for use in all
establishments other than domestic and those directly connected to a
low voltage power supply network which supplies buildings used for
domestic purposes.
14 Agilent Graphite Tube Atomizer GTA 120 User's Guide