P3 Command; P4 Command; Spi Interface Commands - Digi XBee3 802.15.4 User Manual

AT commands

P3 command

Sets or displays the DIO13/UART_DOUT configuration (Micro pin 3/SMT pin 3/TH pin 2).
Parameter range
0, 1, 3 - 5
Parameter
0
1
2
3
4
5
Default
1

P4 command

Sets or displays the DIO14/UART_DIN configuration (Micro pin 4/SMT pin 4/TH pin 3).
Parameter range
0, 1, 3 - 5
Parameter
0
1
2
3
4
5
Default
1

SPI interface commands

The following commands affect the SPI serial interface on SMT and MMT variants. These commands
are not applicable to the through-hole variant of the XBee3; see D1 through D4 and P2 for through-
hole SPI support.
Digi XBee3® 802.15.4 RF Module User Guide
Description
Disabled
UART DOUT
N/A
Digital input
Digital output, low
Digital output, high
Description
Disabled
UART DIN
N/A
Digital input
Digital output, low
Digital output, high

SPI interface commands

104