D1 Command; D2 Command - Digi XBee3 802.15.4 User Manual

AT commands
Parameter
1
4
Default
N/A

D1 command

Sets or displays the DIO1/ADC1/TH_SPI_ATTN configuration (Micro pin 30/SMT pin 32/TH pin 19).
Parameter range
SMT/MMT: 0, 2 - 5
TH: 0 - 5
Parameter
0
1
2
3
4
5
Default
0

D2 command

Sets or displays the DIO2/ADC2/TH_SPI_CLK configuration (Micro pin 29/SMT pin 31/TH pin 18).
Parameter range
SMT/MMT: 0, 2 - 5
TH: 0 - 5
Parameter
0
1
2
Digi XBee3® 802.15.4 RF Module User Guide
Description
Keeps device awake for 30 seconds.
Restore defaults (equivalent to sending an
Description
Disabled
SPI_CLK for through-hole devices
N/A for surface-mount devices
ADC
I/O settings commands
RE command).
Description
Disabled
SPI_ATTN for the through-hole device
N/A for surface-mount device
ADC
Digital input
Digital output, low
Digital output, high
108