Inverter Safety Instructions; Battery Safety Instructions - Sensata Dimensions 12LP15 Owner's Manual

Inverter Safety Instructions

WARNING: Power Inverters produce hazardous voltages. To avoid risk
of harm or fire, the unit must be properly installed.
WARNING: There are no user serviceable parts inside. Do not remove the
cover.
WARNING: Power Inverters should not be mounted in a location
that may be exposed to rain or spray.
WARNING: Power Inverters should not be installed in a zero-clearance
enclosure.
WARNING: Damage to the Power Inverter will occur if correct
polarity is not observed when installing the inverter's DC input
cables.
WARNING: Damage to the Power Inverter will occur if an external AC
power source is applied to the inverter's AC hardwire output.
WARNING: Power Inverters contain a circuit breaker and capacitor
that may produce a spark upon connection or during normal operation.
Do not mount in a confined battery or gas compartment
WARNING: Be sure the Power Inverter is turned OFF and AC power
is disconnected when batteries are being connected, disconnected,
serviced, and replaced or personal injury and/or damage to the inverter
could result.
WARNING: Working near lead-acid batteries is dangerous. There is a
risk of acid exposure.

Battery Safety Instructions

WARNING: Batteries generate explosive gases during operation.
WARNING: There is risk of high current discharge from shorting a
battery that can cause fire and explosion. Use insulated tools during
installation.
WARNING: Remove all rings, watches, jewelry or other conductive
items before working near the batteries.
WARNING: Inspect the batteries at least once a year for cracks, leaks or
swelling.
WARNING: Dispose of the batteries according to local regulations. Do
not incinerate batteries; risk of explosion exists.
WARNING: A fuse must be installed between the battery and the
inverter to protect against shorted cables.
122221 12LPC15 Manual Rev A.docx
3