Table of Contents
Advertisement
1 Safety Instructions
Important: Read this manual before installation, it contains important safety, installation, and
operating instructions. Save this manual and keep it in a safe place.
1.1
Warning and Danger Symbols:
To reduce the risk of electrical shock and to ensure the safe operation of your Dimensions
power inverter, the following symbols are used throughout the manual.
ATTENTION:
Important operating instructions.
Follow them closely.
1.2
Inverter System Precautions:
Inverter Systems produce hazardous voltages. To avoid risk of harm or fire, the unit
must be properly installed.
There are no user serviceable parts inside, do not remove the cover.
The Inverter System should not be mounted in a location that may be exposed to rain
or spray.
The Inverter System should not be installed in a zero clearance enclosure.
Damage to the Inverter System will occur if correct polarity is not observed when
installing the DC input cables.
Damage to the Inverter System will occur if an external AC power source is applied to
the inverter's AC hardwire output.
The Inverter System contains a capacitor that may produce a spark. Do not mount in a
confined battery or gas compartment.
Be sure the Inverter System is turned OFF during installation.
1.3
Battery Precautions:
Working in the vicinity of lead-acid batteries is dangerous. There is a risk of acid
exposure.
Batteries generate explosive gases during operation.
There is risk of high current discharge from shorting a battery that can cause fire and
explosion. Use insulated tools during installation.
Remove all rings, watches, jewelry or other conductive items before working near the
batteries.
Inspect the batteries once a year for cracks, leaks or swelling.
Dispose of the batteries according to local regulations. Do not incinerate batteries; risk
of explosion exists.
Form: 122189 © 2012 Sensata Technologies
DANGER:
Risk of personal harm and/or
electrocution exists in this area.
Use extreme caution.
3
Advertisement
Table of Contents
