Gimbal Damper Re-Attachment; Remove The Camera Configuration From The Drone; Push Up On Tab Connected To Camera Configuration; Put The Gimbal Damper Back Into The Plastic Alignment Mounts - YUNEEC Typhoon H Plus Maintenance, Troubleshooting & Parts

Introduction
This guide will demonstrate how to put the gimbal damper back together on a gimbal, if it has come apart.

Remove the camera configuration from the drone.

Gimbal Damper Re-attachment

Push up on the tab connected to the camera configuration
and slide the entire apparatus off.
Put the gimbal damper (the rubber balls) back into the plastic
alignment mounts.
To Help push these dampeners back into place, use a blunt skinny tool.
While holding the two plates together.
It will take patience to complete.
NO SHARP objects
27