Basic hardware procedures
4.4
Getting access to the component
V
CAUTION!
Before removing or installing covers, turn off the server and all
●
peripheral devices. Also unplug all power cables from the outlet.
Failure to do so can cause electric shock.
In order to comply with applicable EMC regulations (regulations on
●
electromagnetic compatibility) and satisfy cooling requirements, the
server must not run while the side cover is removed.
For further safety information, please refer to chapter
●
information" on page
4.4.1
Removing the side cover
Figure 4: Removing the side cover
Ê Pull up on the locking lever (1).
Ê Open the side cover (2).
Ê Remove the side cover (3).
46
29.
Upgrade and Maintenance Manual
"Important
TX1310 M3