Before You Start - Fujitsu PRIMERGY TX1310 M3 Upgrade And Maintenance Manual

2

Before you start

Before you start any upgrade or maintenance task, please proceed as follows:
Ê Carefully read the safety instructions in chapter
page 29.
Ê Make sure that all necessary manuals are available. Refer to the
documentation overview in section
page 26. Print the PDF files if required.
Ê Make yourself familiar with the procedure categories introduced in section
"Classification of procedures" on page
Ê Ensure that all required tools are available according to section
need at hand" on page
Advanced Thermal Design
The Advanced Thermal Design option allows you to operate the system with a
wider temperature range of 5 °C to 40 °C, depending on your system and
configuration.
This option can only be ordered from the manufacturer and is
indicated by the respective logo on the identification rating
plate.
V
CAUTION
In a system that is configured with Advanced Thermal Design, only
certain components which support the respectively increased higher
operating temperature range may be installed and used. For applicable
restrictions, please refer to the official configurator tool.
TX1310 M3
"Documents you need at hand" on
23.
Upgrade and Maintenance Manual
"Important information" on
19.
"Tools you
17