Removing An Odd; Preliminary Steps; Ê "Suspending Bitlocker Functionality; Shutting Down The Server - Fujitsu PRIMERGY TX1310 M3 Upgrade And Maintenance Manual

Accessible drives

12.2.2 Removing an ODD

Upgrade and Repair Unit
(URU)
Tools: tool-less

12.2.2.1 Preliminary steps

"Suspending BitLocker functionality" on page 61
Ê
"Removing backup and optical disk media" on page 63
Ê
"Verifying and configuring the backup software solution" on page 63
Ê
"Shutting down the server" on page 44
Ê
"Disconnecting the power cord" on page 45
Ê
"Getting access to the component" on page 46
Ê
12.2.2.2 Removing an ODD
Figure 93: Removing the ODD
Ê To disengage the ODD, press down on the latch marked "1" (1) while pulling
the locking handle in the drive cage to the left (2).
Ê Remove the ODD out of its bay (3).
160 Upgrade and Maintenance Manual
Hardware: 10 minutes
TX1310 M3