7.2
Installing 3.5-inch HDDs
Upgrade and Repair Unit
(URU)
Tools: tool-less
7.2.1
Preliminary steps
"Shutting down the server" on page 44
Ê
"Disconnecting the power cord" on page 45
Ê
"Getting access to the component" on page 46
Ê
Ê Locate the correct drive bay, see section
7.2.2
Removing Easyrail out of the upper HDD bay
Figure 32: Removing the Easyrails out of the bay (A)
Figure 33: Removing the Easyrails out of the bay (B)
Ê Press in the green handle on the Easyrail (1) and pull the rail out of the
desired 3.5-inch HDD drive bay (2).
I
Easyrails can be different (see figures).
TX1310 M3
Upgrade and Maintenance Manual
Hard disk drives (HDDs)
Hardware: 5 minutes
"Mounting order" on page
84.
85