Basic Information - Fujitsu PRIMERGY TX1310 M3 Upgrade And Maintenance Manual

System fans
8.1

Basic information

V
CAUTION!
Since the system fans are not redundant they have to be replaced
immediately in case of defects or pre-failure events.
Figure 40: Positions of the system fans
1 Rear fan (Fan OEM)
2 CPU fan (implemented in the heat sink)
3 Front fan (Fan SYS)
I
The CPU fan is implemented in the heat sink. When the CPU fan is
defective, the heat sink must be replaced, see section
heat sink" on page
96
147.
Upgrade and Maintenance Manual
"Replacing the
TX1310 M3