IDTECK iTDC Troubleshooting Manual page 8

1) How to set up in/output configuration according to number of doors.
Solution
※ Door 1, 2: Connect to iTDC Main Board
Door 3, 4: Connect to EIO88 Board
Input Ports #1 (EIO88)
 Exit Button for Door 3
 Output to Output Port #1 (EIO88)
Input Ports #2 (EIO88)
 Door Contact for Door 3
 Output to Output Port #2 (EIO88)
Input Ports #3 (EIO88)
 Exit Button for Door 4
 Output to Output Port #3 (EIO88)
Input Ports #4 (EIO88)
 Door Contact for Door 4
 Output to Output Port #4 (EIO88)
EIO88 Expansion Board
Output Ports #1 (EIO88)
 Door Lock for Door 3
 Input Port #1(EIO88), Output for Reader #3
Output Ports #2 (EIO88)
 Alarm for Door 3
 Input Port #2(EIO88), Output for Reader #3
Output Ports #3 (EIO88)
 Door Lock for Door 4
 Input Port #3(EIO88), Output for Reader #4
Output Ports #4 (EIO88)
 Alarm for Door 4
 Input Port #4(EIO88), Output for Reader #4
2011 Jan IDTECK. © All rights reserved
8