IDTECK iTDC Troubleshooting Manual page 29

2) Communication does not work.
③ Check the Configuration Setting for External and Internal Converters
: Check the Configuration Settings for External Converter (iLAN422), Internal Converter (IIM7100A)
※ Configuration for Using External Converter (ILAN422)
START  PROGRAM  IPSearch  CLICK IPSearch.exe
ㆍClick the Refresh button to search all LAN Converter
information in the network
ㆍSelect and Click the LAN Converter of choice
ㆍInsert IP Address and Subnet Mask according to network
ㆍClick Alter to save
Web Server Embedded in Converter (One Page Quick Setup)
Type : STATIC IP
ㆍSTATIC IP: Can only use STATIC IP for iTDC PRO S/W
ㆍ Consult with network specialist for configuring
IP Address, Gateway, Subnet Mask
ㆍ IP Address : Can't use same IP address within same network
ㆍSerial Type: Select RS232/RS422/RS485 according to
communication type
ㆍBaud Rate: 9600 (iRecommended Comm. Speed for iTDC)
ㆍConnection Mode: TCP Server
ㆍConnection Port Number: 5000
ㆍPrimary DNS, Remote Host IP Address: No configuration needed
2011 Jan IDTECK. © All rights reserved
29