IDTECK iTDC Troubleshooting Manual page 6

1) How to set up in/output configuration according to number of doors.
※ 1 Door / Using In-Out Reader :
2, 3 Door / Using In Reader Only :
Input Ports #1 (EIO88)
 Exit Button for Door 2
 Output to Output Port #1 (EIO88)
Input Ports #2 (EIO88)
 Door Contact for Door 2
 Output to Output Port #2 (EIO88)
Input Ports #3 (EIO88)
 Exit Button for Door 3
 Output to Output Port #3 (EIO88)
Input Ports #4 (EIO88)
 Door Contact for Door 3
 Output to Output Port #4 (EIO88)
Connect to iTDC Main Board
Connect to EIO88 Board
EIO88 Expansion Board
Output Ports #1 (EIO88)
 Door Lock for Door 2
 Input Port #1,
Output for Reader #3
Output Ports #2 (EIO88)
 Alarm for Door 2
 Input Port #2,
Output for Reader #3
Output Ports #3 (EIO88)
 Door Lock for Door 3
 Input Port #3,
Output for Reader #4
Output Ports #4 (EIO88)
Alarm for Door 3

 Input Port #4,
Output for Reader #4
2011 Jan IDTECK. © All rights reserved
6