Table of Contents
Advertisement
Alarm and Control settings allow fine-tuning of activation criteria with deadband and delay functions.
Activation parameters for Alarm, Control and Wash functions are listed in the Table 9.1
ALARM
Set Low Alarm
Set High Alarm
Set Low Deadband
Set High Deadband
Set Off-Delay
Set On-Delay
Exit
Refer to the AV38 Manual for detailed relay operation and setup.
6.
AquaComm™ Interface
AquaComm™ is an application software package that runs on computers with Microsoft Windows
operating systems. Refer to the USB Comms Adapter manual for installation and setup.
When the Free Chlorine sensor is connected AquaComm™ will automatically recognize the sensor
type and display chlorine concentration and temperature.
To calibrate, configure, diagnose or create data log files, select the pull-down menus.
Multiple AquaComm™ windows may be opened for as many unique communications ports that are
supported on the computer.
Thermo Scientific AquaSensors
CONTROL
Set Phase
Set Setpoint
Set Deadband
Set Off-Delay
Set On-Delay
Exit
™
™
AquaChlor
Free Chlorine Monitor User Guide
WASH
Set Interval
Set Duration
Set Off-Delay
Exit
33
Advertisement
Table of Contents
