Gns 480 Map Mode Nav Data Options - Garmin CNX 80 Pilot's Manual

Basic Operation
Moving Map
22

GNS 480 Map Mode Nav Data Options

The following table shows the choices of the options you can make for setting up the Map Mode display in
your GNS 480. You can customize the Nav information displayed on the left side of the display for Map Mode
pages 2, 3, and 4. You can select these options as described below.
1. Press MAP to reach Map mode.
2. Turn the Large knob to select pages 2-4. You can't change the Nav information options for page 1.
3. Press the Menu/Enter key.
4. Press the More selection key until the Nav Data selection is available.
5. Press the Nav Data menu item key.
6. Press the Sel Data menu item key to activate selection of options of Nav Data information.
7. Turn the Large knob to highlight the desired Nav Data item. Turn the Small knob to change the
displayed option.
8. Press Menu/Enter when you have completed your selections.
9. If desired, turn the Large knob to another Map Mode page and customize that page.