Table of Contents
Advertisement
Setting Up a Telnet Session
S
U
ETTING
P A
Use a telnet client to set up a telnet session to the modem. To set up a telnet session, specify the
LAN IP address of the modem to establish communication. The default LAN IP address is
10.0.0.1. If this IP address has changed, contact your service provider.
Below is an example using Microsoft Windows 98:
1
Click
Start
,
Run
2
Enter the LAN IP address as a parameter to the telnet command, then click
Windows telnet client and access the password prompt.
3
Enter the telnet password to access the
MM701G is
44
T
ELNET
to access the
Run
dialog.
password
.
S
ESSION
Main Menu
page. The default telnet password for the
OK
to start the
MM701G User Manual
Advertisement
Table of Contents
