ADC Modem MM701G User Manual page 32

Configuring the WAN
Parameter
Encapsulation
Login Name
Login Password
Authentication
4 Do one of the following:
•
Click Apply
•
Click Reset
•
Click Delete
Changes" on page
•
Click Save Changes
26
Description
Select the encapsulation type that is supplied by the service provider. The options
are:
• VC-MUX—Virtual Channel Multiplexer-based encapsulation, which allows one
protocol to be run over the session.
• LLC—Logical Link Control, which allows multiple protocols to be run over the
session.
A PPP session requires the Login Name supplied by the service provider.
A PPP session requires the Login Password supplied by the service provider.
Select the authentication protocol provided by your service provider for PPP
sessions. The authentication protocol type must match at the MM701G and the
service provider. The options are:
• PAP—The modem sends authentication requests to the service provider and
authentication occurs only once during the life of the link.
• CHAP—The service provider returns an authentication challenge to the modem
during the authentication.
, then save changes as described in
to restart the session.
to remove the session, then save changes as described in
38.
to save changes made to the configuration.
"Saving Changes" on page
MM701G User Manual
38.
"Saving