Table of Contents
Advertisement
Setting Up the WAN
6
Select
Apply
to immediately activate the changes that you have made for this session.
7
From the
Main Menu
changes will be lost upon reboot or power cycle.
8
If you have enabled DHCP, select
Setting Up NAT
This procedure is optional. Follow this procedure to enable or disable NAT for a WAN session.
From the
Main Menu
1
Select the session for which you wish to enable NAT. The
displays.
2
From the
WAN Sessions Options
disable
to change the NAT status for this session.
Session State
3
Select
Apply
to activate your changes.
made for this session.
4
From the
Main Menu
changes will be lost upon reboot or power cycle.
•
If DHCP Client is selected, you do not need to configure an IP address.
•
In Bridge mode, you need an IP address for the LAN port to use a Browser or Telnet
to manage the MM701G.
50
select
Save New System Configuration
Reboot
, select
WAN Setup
to access the
screen, select the NAT option and enter either
1. Disable
2. Enable
Select session NAT (Return to exit) ->
Apply
, select
Save New System Configuration
to save these settings or the
from main menu to reboot the router.
WAN sessions
page.
WAN Sessions Options
immediately activates the changes that you have
to save these settings or the
screen
enable
or
MM701G User Manual
Advertisement
Table of Contents
